Mueller MC-150 T-Bolt closures are designed for use in high-pressure applications. They can be installed on single-wall or insulated tanks to provide easy access as well as an o-ring seal.
Features
- O-ring gasket provides positive seal (Sold Seperately)
- Stainless lugs and hinges.
- Type T-316 / 316L product contact surface.
- Machine groove for o-ring gasket.
- Full vacuum.
- Optional lift assist available (contact the factory).
- Optional collar length extension upon request.
- ASME Stamped.
Number of lugs: 6 or 8
Torque on bolts: 105 - 115 FT Lbs
Material and Weld Finish is Sandblast ID / Sandblast OD
17-4 PH Bolts and Nitronic Trunnion Rods
T-304 S/S Hardware
PMC lift assist available on this model
NOTE: Polsihing this manway on the inside or outside will require a 15% reduction in rated pressure at any given temperature. Polishing both sides at the same time is not recommended due to excessive thinning of material around the gasket sealing surface.
| Diameter |
# of Lugs |
Pressure Rating @ |
| 100°F |
200°F |
300°F |
400°F |
500°F |
600°F |
650°F |
| 16" |
6 |
188 |
188 |
176 |
171 |
163 |
|
|
| 18" |
6 |
188 |
188 |
176 |
170 |
163 |
|
|
| 20" |
8 |
176 |
176 |
165 |
160 |
153 |
|
|
| 24" |
8 |
176 |
176 |
165 |
160 |
153 |
146 |
142 |
Collar Thickness: .50"
Weight - Starting at 90#'s
THE INFORMATION PROVIDED OR DEPICTED HEREIN IS FOR GENERAL INFORMATIONAL PURPOSES ONLY AND IS NOT INTENDED TO BE CONSTRUED AS AN OFFER, A WARRANTY, OR ANY REPRESENTATION OF CONTRACTUAL OR OTHER LEGAL RESPONSIBILITY.
